Your cart is currently empty!
Model EP13 – base install
The pedestal may be mounted with or without the 4″ spacer. The 4″ spacer is designed to be used on sites with no curb, so the bottom of the spacer is the same as the bottom of the vehicle’s tires. When mounting on a curb, the 4″ spacer is not needed.
NOTE: the pedestal sits diagonal with a corner being the front of the pedestal.
Mount the base (pedestal or pedestal + spacer) according to this diagram:
See the following pictures for install examples.
Any corner can be the front of the pedestal
Tape the nut into the socket unless you have go-go gadget arms
Attach to the spacer or ground as appropriate